FRP Pipe/FRP Tank/Filament Winding Machine/Electrolytic Cell/FRP Grating Machine/FRP Pultrusion Machine
Continuous filament winding FRP pipe and tank is the introduction of foreign advancedtechnology and techniques, using continuous fiber winding process, the resin impregnatedglass fibers wrapped in the control law by winding under tension to the rotating mandrel,and after curing, the Stripping, repair made. Product combines the advanced foreign technology and domestic production experience, from design to molding are using computer control, a high degree of automation, can produce all kinds of DN50-DN2600pipelines and vertical or horizontal tanks, transport and storage may be a variety of medium,with wear, anti-aging, high strength, within the table is smooth, non-toxic, non-tube,installation, and many other advantages. Products popular with the hierarchy of international distribution, from the inside is divided into: 1. Inner liner 2. Structure of layer 3. Outer protective layer. Products have a very strong sense of design, is "The Diversity" material.This is "the same" of metal materials can not match.
Fiberglass storage tanks Characters
1.No protections such as coating, painting or cathodic are needed. 2.FRP tanks are resistant to nearly all chemicals even at much higher temperatures than other plastic materials. 3.Higher mechanical resistance due to the glass reinforcement. 4.Very long, virtually infinite life of the material, which requires no maintenance. 5.Absolute impermeability of tanks and joints both from external -to internal and vice-versa. 6.Low weight of tanks, that allows for the use of light installation and transport equipment. 7.On site production of large tanks 8.Workability of the material on sites, utilizing simple equipment.
Application
Can be widely used in petrochemical, textile printing and dyeing, synthetic, pharmaceutical, food brewing industry and so on.Widely used in chemical corrosive liquid storage.Car transport pan tank can be widely used in storage and transportation of chemical corrosive liquid.
FRP tank is made with fiberglass and resin with filament winding process, it's characteristics are:
- Light weight, its density is 1.5-1.9, equals one forth of the steel, but its strength is higher.
- Corrosion resistant, we can select different kind of resin against the variety of the media, such as acid, alkaline, salt and oil etc.
- The inner surface is very smooth, the roughness coefficient is 0.0084, it is easier to clean, and has good sanitary property.
- Good property against low temperature, it can be used under the condition of -80ºC.
- Good thermal insulation property, its thermal expansion factor is 2*10-5/ºC, the thermal conductivity is 0.2 Kcal.m/m2.h. ºC.
- The formation is easy, maintenance is convenient and it is suitable for the comprehensive equipment, the diameter is more than 4000mm can be fabricated on jobsite.
It's volume is 1m3-5000m3, and already be widely used for Chemical, Petrochemical, dyeing, pharmaceutical, metallurgy, brewing, water treatment, chlor-alkali, etc many different industries.